Email:sales@wxlongchen.com Wuxi Longzhichen Machinery Co., Ltd

Wuxi Longzhichen Machinery Co., Ltd

Product Categories
Contact Us

Contact: Mr Min

Mobile: +86-18921387058
Tel: +86-510-83050629
E-mail: sales@wxlongchen.com


Add: Yangshan Supporting Area, Huishan District, Wuxi City, Jiangsu Province
Postcode: 214156
Fax: +86-510-83050596

 

CK45 Guide Pillar Column Guide Bar Linear Guide Rod Tie Rod Tie Bar Rod Bearing For Hydraulic Cylinders

CK45 Guide Pillar Column Guide Bar Linear Guide Rod Tie Rod Tie Bar Rod Bearing For Hydraulic Cylinders

CK45 guide rods are slender structural units used to provide free motion in one direction. Commonly, the product surface is processed by hard chromium plating technology, and then it is mirror polished, with characteristics of friction resistance and corrosion resistance.

Product Details

1.Brief Introduction to CK45 Linear Guide Bar

Guide rods are slender structural units used to provide free motion in one direction. Commonly, the product surface is processed by hard chromium plating technology, and then it is mirror polished, with characteristics of friction resistance and corrosion resistance. 

Tie rods are often used in steel structures, such as bridges, industrial buildings, tanks, towers, and cranes. In automobiles, the tie rods are part of the steering mechanism. They differ from the archetypal tie rod by both pushing and pulling (operating in both tension and compression). In ships, tie rods are bolts which keep the whole engine structure under compression. They provide for fatigue strength. They also provide for proper running gear alignment which prevents fretting. They help to reduce the bending stress being transmitted to the transverse girder.

内容.jpg

2.Product Specifications of CK45 Guide Rod

Steel Grade according to different standards:

China steel grades: GB standard

45# Steel

Germany steel grades: DIN standard

CK45

Japanese steel grades: JIS standard

S45C

American steel grades: AISI Standard

1045


3.Induction hardening: It is a form of heat treatment in which a metal part is heated by induction heating and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardening is used to selectively harden areas of a part or assembly without affecting the properties of the part as a whole. The hardening depth is 1.5-5mm; medium/low-frequency quenching may lead to excessive depth and negative effect on strength; high-frequency quenching generally result in a shallow depth, and may ensure the balance of hardness and strength.

4.Thermal refining: Generally, the heat treatment method combined of quenching and high-temperature tempering is called thermal refining, which is widely applied to various important structural parts, especially the connecting rods, bolts, gears and shafts working under alternating load. The tempered sorbite has better mechanical property than normalized sorbite of the same hardness. Its hardness depends on tempering temperature and relates to stability of tempering and sectional dimension of workpiece, and is generally HB200-350.

图片13.png

图片14.png

图片15.png

5.Work Flow

Hardening
High-frequency induction hardening guarantees the surface hardness and optimum strength of the material, which makes the shaft highly durable and resistant to abrasion. We can supply several conditions as follows:
1.Hard chrome plated (surface without heat treatment)
2.High-frequency induction hardened hard chrome plated
3.Quenched and Tempered
4.Induction hardened with Q&T
Centerless Grinding
Our grinding lines work at high processing speeds with optimum efficiency. Depending on material and diameter requirements, surface qualities with roughness specifications up to Ra0.2μm can be obtained.
Surface Treatment
By hard chrome plating, your components obtain a high resistance to corrosion and wear. This means high endurance over the entire life of the product. Usually, the thickness of hard chrome plating is 10μm~5μm. Resistance in front salt spray (fog) test environment according to the ASTM B-117-97 could be 36 hours.
Polishing
We can guarantee you mirror-like polished surfaces with our optimal finish grinding method without material loss.

6.Packages of Tie Rods

活塞杆3.jpg

7.FAQ

1.Q: Can your products be customized?

A: We are specialized in cylinder, piston rod and cylinder barrel with an experience of about 10 years. We have a strong designing team, so any conventional product can be customized.

2.Q: What about the after-sale services?

A: We provide 12 months quality warranty after dispatch. We also offer long-time technical advisory services.

3.Q: What about the transpotation?

A: We can take any type of transpotation according to the customer's demand.

Wuxi Longchen has been engaged in ck45 guide pillar column guide bar linear guide rod tie rod tie bar rod bearing for hydraulic cylinders for many years as one of the leading manufacturers and suppliers in China. Our products are of high precision, good performance and competitive price. Please rest assured to wholesale the quality product made in China from our factory.
Related Products
Copyright © Wuxi Longzhichen Machinery Co., Ltd All Rights Reserved.
QR Code